Krell 200 Watt Vanguard Integrated Stereo Amplifier
The Vanguard incorporates a 200-watt-per channel amplifier and a Class A preamplifier, enclosed in a chassis that borrows its design and construction from the new Krell Foundation preamp/processor, Connect stream player, Illusion preamp and iBias amplifiers. An optional, field-installable digital module with USB, HDMI, coaxial, and optical inputs as well as Ethernet audio and apt-X Bluetooth streaming will also be available.
The Vanguard’s amplifier incorporates a massive power supply with a 750 VA toroidal transformer and 80,000 microfarads of storage capacitance. The tremendous amount of energy on tap provides 200 watts per channel into 8 ohms and 400 watts into 4 ohms. Two quiet, thermostatically controlled fans permit the use of a surprisingly compact chassis.
The preamplifier section of the Vanguard borrows its balanced, fully discrete Class A circuit concepts from Krell’s top-of-the-line Illusion preamplifiers. Krell’s Current Mode technology is employed to assure unequaled signal bandwidth, easily enough to handle the latest high-resolution PCM and DSD audio sources without impacting high-frequency response and detail.
Packed with many of Krell’s most musical-sounding technologies, the elegant chassis is living-room-friendly. Yet it has enough power to achieve incredible, lifelike dynamics with any speaker.
The front-panel menu system provides configuration features such as input naming and input trim. Theater Throughput mode lets the Vanguard serve as the core of a surround-sound system without sacrificing two-channel sound quality. Analog Inputs include three stereo RCA and one stereo balanced XLR. High-quality WBT speaker cable terminals provide a secure, electrically ideal connection.
The Vanguard also offers features that make it perfect for custom installation, such as 3.5mm jacks for IR input and 12-volt trigger input and output, as well as optional rack-mount ears. Additionally, the unit can be controlled with home automation systems through its Ethernet connection.
A key option for the Vanguard is the digital module, which can be added at the factory or by a dealer. The digital module includes USB, HDMI inputs and output, coax and optical digital inputs; Ethernet music streaming controlled through dedicated iOS and Android apps; and apt-X Bluetooth wireless for convenient streaming from phones, tablets and computers.
The Vanguard also offers features that make it perfect for custom installation, such as 3.5mm jacks for IR input and 12-volt trigger input and output, as well as optional rack-mount ears. Additionally, the unit can be controlled with home automation systems or the Krell web server through its Ethernet connection.
|Inputs ||1 pr. balanced via XLR connectors |
pr. single-ended via RCA connectors
|Outputs ||1 pr. speaker outputs via WBT gold-plated
|Control inputs||1 remote IR detector input via 3-conductor
3.5 mm connector |
1 12 VDC trigger input via 2-conductor 3.5 mm
|Control output ||1 programmable 12 VDC trigger output (300
mA maximum current) via 2-conductor 3.5 mm connector |
|Input impedance ||Balanced: 95 kO |
Single-ended: 47.5 kO
|Frequency response ||20 Hz to 20 kHz +0, –0.01 dB
<2 Hz to 150 kHz +0, –3 dB
|Signal-to-noise ratio ||>90 dB, wideband, unweighted, at
maximum gain, referred to full power output |
|Input sensitivity ||Single-ended or balanced: 160 mV RMS |
|Total harmonic distortion ||<0.015% at 1 kHz, at 200 W, 8
O load |
<0.13% at 20 kHz, at 200 W, 8 O load
|Output power ||200 W RMS per channel at 8 O |
400 W RMS per channel at 4 O
|Output voltage ||113 V peak to peak |
40 V RMS
|Output current ||16 A peak |
|Slew rate ||50 V/µs |
|Output impedance ||<0.066 O at 20 Hz |
O, 20 Hz to 20 kHz
|Damping factor ||>121 at 20 Hz, referred to 8 O
>106, 20 Hz to 20 kHz, referred to 8 O
|Power consumption||Standby: 12 W |
Idle: 70 W
Maximum: 1300 W
Standby: 41 BTU/hr |
Idle: 239 BTU/hr
|Dimensions ||17.1 in W x 4.15 in H x 17.5 in D
434 mm W x 105 mm H x 445 mm D
|Weight ||Unit only: 39 lb [17.7 kg] |
shipped: 47 lb [21.3 kg]